Aluminium 5052 Sheet Plate | AMS 4016 | UNS A95052 | DIN 3.3523

AISI 5086 Sheets, Aluminum 3.3545 Plates, Aluminum 5086 Sheet, Aluminum Alloy 5086 Cold Rolled Sheet, ASTM B209 Aluminum Sheets, Aluminum 5086 Sheets, Aluminum 5086 Hot Rolled Sheet, Aluminum 5086 Hot Rolled Plate, UNS A95086 Plate, UNS A95086 Sheet Manufacturer in Mumbai, India.

PM Industries manufactures, supplies, and stocks AMS 4016 Aluminium 5052 Sheet Plate (UNS A95052) in a range of thicknesses, tempers, and sizes. AMS 4016 covers Aluminium 5052 in sheet and plate form to aerospace and precision specification requirements. Aluminium 5052 belongs to the 5xxx series, with magnesium as the primary alloying element at approximately 2.2–2.8%. It's a non-heat-treatable alloy that develops strength entirely through solid-solution hardening and cold work, with no precipitation hardening response. That means the mechanical properties in service are stable and don't change with thermal exposure, which simplifies design and production planning.

Buy Aluminum 5086 Cut To Size Sheets, ASTM B209 Aluminum 5086 Plates, Aluminum 5086 Industrial Sheets and Plates, Aluminum 5086 Ring, ASME SB209 Aluminum 5086 Perforated Sheets Stockholder, Aluminum 5086 Foil, Aluminum 5086 Sheet, Supplier in India.

5052 is one of the most widely used aluminium alloys globally for sheet metal fabrication, and its position in that market is consistent with its properties. It offers better corrosion resistance than the 2xxx and 7xxx series high-strength alloys, better strength and formability than the 1xxx commercially pure series, and more practical formability in complex sheet metal work than 5083 or other higher-magnesium alloys. For the broad category of fabricated sheet metal products that need good corrosion resistance and good formability at moderate strength, 5052 is the default specification.

Marine corrosion resistance is 5052's most consistently cited performance advantage over competing aluminium sheet grades. In coastal atmospheres, salt spray, and seawater splash environments, 5052 maintains its surface integrity and avoids the pitting that affects 2xxx and 7xxx series alloys in those conditions. For marine vessel components, offshore equipment, and coastal architectural applications, that chloride corrosion resistance is the primary selection driver. It's not a seawater immersion alloy in the way that higher-magnesium 5083 or 5086 are, but for atmospheric and splash zone marine exposure it performs very well.

Formability in H32 temper is one of the practical reasons 5052 dominates sheet metal fabrication in its strength class. The H32 condition provides moderate strength with ductility sufficient for most press brake bending, roll forming, and moderate deep drawing operations. For more severe forming, the O (annealed) temper provides additional formability at some reduction in final strength. The combination of those temper options gives fabricators control over the forming-strength trade-off for specific production requirements.

Fatigue resistance above equivalent-strength competing aluminium alloys is relevant for sheet metal components subject to vibration, pressure cycling, or repeated flexing in service. Fuel tank sheet, pressure vessel shell plate, and vehicle body panels all benefit from fatigue resistance, and 5052's fatigue endurance limit is one of the higher values available in non-heat-treatable aluminium sheet.

Sheet and plate are available in H32, H34, H36, H38, and O tempers across a range of thicknesses and sizes with full material certification to AMS 4016 and applicable specifications including ASTM B209. Contact PM Industries for thickness, temper, width, length, and pricing.

Specification Aluminium 1050 Sheet Plate | AMS 4001 | UNS A91050 | DIN 3.0255

Specifications	ASME SA 240/ASTM A 240
Standard Sizes	1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
Width	10-2500mm
Length	2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface	2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hairline, sand, blast, Brush, etching, etc
Thickness	0.1mm to 100 mm Thk
Hardness	Quarter Hard, Half Hard,Spring Hard, Soft, Hard
Stock available in form of	Shim Sheet, Rolls, Strip, Flats, Clad Plate, Plain Sheet, Plate, Sheet, Coils, Foils, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Blank (Circle), soft annealed, sheared, annealed, tread plate,descaled, Checker Plate
Profiling	Plasma Plate Cutting
Value added services	Plasma cutting, Waterjet cutting, Laser cutting, welding, edge preparation, etc.
Test Certificates	EN 10204/3.1B, NACE MR0103, NACE MR0175
	Raw Materials Certificate
	100% Radiography Test Report
	Third Party Inspection Report, etc

Available Types of Aluminium 1100 Sheet & Plate

Aluminum 1050 Sheets & Plates – Equivalent Grades

European Standard	BS (OLD)	USA (AA)	GERMANY (DIN)	ISO	IS	Canadian
EN AW-1050 A	1E	1050	Al99.5	Al99.5	19500, 19501	1 S

Aluminum 1050 Sheet & Plate – Chemical Composition

Alloy (ISS)		Equivalent alloy (A.A)	Copper		Magnesium		Silicon		Iron		Managanese Others* (Total)		Remarks
Old	New	U.S.A	Min.	Max.	Min.	Max.	Min.	Max.	Min.	Max.	Max	Max.		Aluminum 99.0% Min.
1 B	19500	1050	—	0.05	—	—	—	0.30	0.4	—	0.05	0.1		Aluminum 99.5% Min.

Aluminum 1050 Sheets & Plates – Mechanical Properties

Alloy	Temper	UTS (Mpa)		Yield Strength (Mpa)		Elongation (%)
		Minimum	Maximum	Minimum	Maximum	A 50mm (Minimum)
EN AW-1050 A	F	60	–	20	–	23
	O	60	95	20	–	23