Aluminium 1050 Sheet Plate | AMS 4001 | UNS A91050 | DIN 3.0255

Aluminum 3.0255 Plates, Aluminum 1050 Sheet & Plates, UNS A91050 Sheet, Aluminum 1050 Sheets, AISI 1050 Sheets, Aluminum Alloy 1050 Hot Rolled Plate, UNS A91050 Plate, Aluminum 1050 Hot Rolled Sheet Manufacturer in Mumbai, India.

PM Industries manufactures, supplies, and stocks AMS 4001 Aluminium 1050 Sheet Plate (UNS A91050) in a range of thicknesses and sizes. AMS 4001 covers Aluminium 1050 in sheet form to aerospace and precision specification requirements. Aluminium 1050 is a commercially pure aluminium grade with 99.5% minimum aluminium content. The high purity level is what defines its key properties: excellent corrosion resistance, high thermal and electrical conductivity, and very good formability. What it doesn't offer is high structural strength. Aluminium 1050 is specified for applications where corrosion resistance, conductivity, formability, and clean surface quality are the primary requirements, not structural load-bearing performance.

Aluminum 1050 Ring, Aluminum 1050 Foil, Aluminum 1050 Sheet, Aluminum 1050 Chequered Plates, ASME SB209 Aluminum 1050 Perforated Sheets Stockholder, Aluminum 1050 Industrial Sheets and Plates, Aluminum 1050 Circle, Aluminum 1050 Coils Supplier in India.

The distinction from alloy grades is straightforward. Adding copper, magnesium, silicon, or zinc to aluminium improves strength considerably but reduces corrosion resistance, conductivity, and in some cases formability. Aluminium 1050 keeps the full benefit of the pure metal in those three properties, which is why it remains the standard specification for chemical processing equipment liners, food contact surfaces, electrical conductor sheet, and heat exchanger components where those properties matter more than strength.

Formability is the characteristic most consistently cited in fabrication applications. Aluminium 1050 in the annealed condition is one of the most easily formed aluminium materials available. It folds and bends to tight radii without cracking, draws into complex shapes without excessive springback, and can be spun, rolled, and formed by virtually any standard sheet metal process. For decorative panels, lighting reflectors, and complex formed enclosures where appearance and shapability matter more than load capacity, 1050 is practical and cost-effective.

Corrosion resistance in chemical and food processing environments benefits from the high purity. Commercial aluminium alloys are susceptible to preferential attack at second-phase particles and along grain boundaries in certain corrosive media. Pure aluminium has fewer of those second phases, which reduces the sites available for localized attack. In dilute acid, alkaline cleaning agents, and food-grade chemical environments, 1050 maintains its surface integrity and cleanliness better than most alloy grades.

Thermal conductivity makes 1050 practical for heat exchanger fins, cooking equipment, and heat sink components where the aluminium's job is to transfer heat efficiently rather than to carry structural load. Its conductivity is approximately 20% higher than typical 6061, which is a meaningful performance difference in heat transfer applications designed around the material's thermal properties.

Sheet and plate are available across a range of thicknesses and sizes with full material certification to AMS 4001 and applicable specifications. Contact PM Industries for thickness, width, length, and pricing.

Specification Aluminium 1050 Sheet Plate | AMS 4001 | UNS A91050 | DIN 3.0255

Specifications	ASME SA 240/ASTM A 240
Standard Sizes	1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
Width	10-2500mm
Length	2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface	2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hairline, sand, blast, Brush, etching, etc
Thickness	0.1mm to 100 mm Thk
Hardness	Quarter Hard, Half Hard,Spring Hard, Soft, Hard
Stock available in form of	Shim Sheet, Rolls, Strip, Flats, Clad Plate, Plain Sheet, Plate, Sheet, Coils, Foils, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Blank (Circle), soft annealed, sheared, annealed, tread plate,descaled, Checker Plate
Profiling	Plasma Plate Cutting
Value added services	Plasma cutting, Waterjet cutting, Laser cutting, welding, edge preparation, etc.
Test Certificates	EN 10204/3.1B, NACE MR0103, NACE MR0175
	Raw Materials Certificate
	100% Radiography Test Report
	Third Party Inspection Report, etc

Available Types of Aluminium 1050 Sheet & Plate

Aluminum 1050 Sheets & Plates – Equivalent Grades

European Standard	BS (OLD)	USA (AA)	GERMANY (DIN)	ISO	IS	Canadian
EN AW-1050 A	1E	1050	Al99.5	Al99.5	19500, 19501	1 S

Aluminum 1050 Sheet & Plate – Chemical Composition

Alloy (ISS)		Equivalent alloy (A.A)	Copper		Magnesium		Silicon		Iron		Managanese Others* (Total)		Remarks
Old	New	U.S.A	Min.	Max.	Min.	Max.	Min.	Max.	Min.	Max.	Max	Max.		Aluminum 99.0% Min.
1 B	19500	1050	—	0.05	—	—	—	0.30	0.4	—	0.05	0.1		Aluminum 99.5% Min.

Aluminum 1050 Sheets & Plates – Mechanical Properties

Alloy	Temper	UTS (Mpa)		Yield Strength (Mpa)		Elongation (%)
		Minimum	Maximum	Minimum	Maximum	A 50mm (Minimum)
EN AW-1050 A	F	60	–	20	–	23
	O	60	95	20	–	23