Aluminium 6061 T6 Round Bar | AMS 4117 | UNS A96061 | DIN 3.3211

ASTM B221 Aluminium 6061 T6 Round Bar Distributor, EN AW-6061 Round Bar Exporter, Aluminium 6061 T6 Round Bar Supplier, 3.3211 Round Bar Stockist, UNS A96061 Round Bar Manufacturer

PM Industries manufactures, supplies, and stocks Aluminium 6061 T6 Round Bar. It's one of the most widely specified aluminium grades across manufacturing, fabrication, and structural engineering. 6061 alloy belongs to the aluminium-magnesium-silicon family. T6 temper means it has been solution heat-treated and artificially aged, which pushes mechanical properties significantly above the annealed condition.

ASTM B221 Aluminium 6061 T6 Round Bar, 3.3211 Round Bar, UNS A96061 Round Bar, Aluminium 6061 T6 Round Bar.

The result is a material that combines good strength, solid corrosion resistance, and reliable machinability in one grade. That combination is why 6061 T6 shows up across so many industries and application types.

Machinability is consistent and predictable. The bar cuts, drills, and turns cleanly, which keeps production efficient and tolerances tight. For high-volume machined parts, brackets, fittings, and precision components, 6061 T6 is often the first grade considered.

Corrosion resistance is good in outdoor and moderate industrial environments. Marine applications are common, particularly when the material is properly protected or anodized. For more aggressive seawater immersion service, higher-alloy grades like 5083 are typically specified instead.

Weldability is good with standard MIG and TIG techniques. Some strength reduction in the heat-affected zone is expected, as with most heat-treatable aluminium alloys. Post-weld heat treatment can restore properties where that matters.

Bar is available in a range of diameters and surface finishes in the T6 temper condition. Contact PM Industries for stock availability, dimensions, and pricing.

Specification Aluminium 6061 T6 Round Bar

Specification	ASTM, EN, DIN, JIS, BS, ASME, AISI
Condition	Hardened & tempered, annealed
Length	1 to 6 Meters, Custom Cut Lengths
Round Bars	Outside Diameter in the range of 4mm to 500mm above as per the customer requirement.
Bright Bars	Outside Diameter in the range of 4mm to 500mm above as per the customer requirement.
Hex Bars	18mm – 57mm (11/16″ to 2-3/4″) above as per the requirement.
Square Bars	18mm – 47mm (11/16″ to 1-3/4″) above as per the requirement.
Flat Bars	1/2” to 10” in thickness range of 2mm to 150mm
Finish	Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Technique	Hot Rolled, Cold Rolled, Cold Drawn, Forged Round Bar, Rod
Tolerance	H8, H9, H10, H11, H12, H13, K9, K10, K11, K12 or as per clients’ requirements
Test Certificates	EN 10204/3.1B, NACE MR0103, NACE MR0175
Raw Materials Certificate	100% Radiography Test Report
Inspection	Third Party Inspection Report, etc

Available Types

Aluminum 6061 Round Bar Chemical Structure

Element	% Present
Si	0.40 - 0.80
Mn	0.15
Mg	0.8-1.2
Fe	0.70 max
Cu	0.15-0.40
Zn	0.25 max
Ti	0.15 max
Cr	0.04-0.35
Al	Balance
Others (Total)	0.15 max
Other (Each)	0.05 max

6061 Aluminum Round Bar Mechanical Properties

Temper	Tensile					Hardness
Ultimate		Yield		Elongation	Brinell
KSI	MPA	KSI	MPA	%
T6, T651	45	310	21	145	25	65

Size

US Bar		Metric		Japanese		Canadian/ASTM
Diameter (Inch)	Size of Bar	Diameter (milimeter)	size of Bar	Diameter (milimeter)	size of Bar	Diameter (milimeter2)	size of Bar
0.375	#3	5.5	5.5	10	10	200	15M
0.25	#2	5	5	6	6	100	10M
0.625	#5	7	7	16	16	500	25M
0.5	#4	6	6	13	13	300	20M
0.875	#7	9	9	22	22	1000	35M
0.75	#6	8	8	19	19	700	30M
1.125	#9	11	11	29	29	2500	55M
1	#8	10	10	25	25	1500	45M
1.375	#11	14	14	35	35
1.25	#10	12	12	32	32
1.625	#13	18	18	41	41
1.5	#12	16	16	38	38
1.875	#15	22	22	48	48
1.75	#14	20	20	44	44
2.25	#18	28	28	57	57
2	#16	25	25	51	51
		36	36
		32	32
		44	44
		40	40
		50	50

Condition

ANN	Annealed
H&T	Hardened and tempered.
PH	Precipitation hardened.

Finish

Bright drawn	BD	Slit rolled edge	SRE
Cold drawn	CD	Polished	P
Peeled and turned	P&T	Rough turned/peeled	RT
Cold finished	CF	Hot rolled pickled and annealed	HRAP
Centreless ground	CG	Hot finished	HF
Smooth turned	ST	reeled and Peeled	PR

Available Stock

Aluminium 6061 T6 Annealed Round Bar	JIS A6061-T6 Shafting Round Bar
UNS A96061 Normalized Round Bar	Aluminium 6061 T6 Automotive Round Bar
3.3211 Quenched & Tempered Round Bar	UNS A96061 Aerospace Round Bar
ASTM B221 Aluminium 6061 T6 Solution Annealed Round Bar	3.3211 Oil & Gas Round Bar
EN AW-6061 Hardened Round Bar	ASTM B221 Aluminium 6061 T6 Marine Round Bar
ISO AlMg1SiCu Bright Round Bar	EN AW-6061 Medical Grade Round Bar
BS L97 Polished Round Bar	ISO AlMg1SiCu Hot Rolled Round Bar
JIS A6061-T6 Mirror Finish Round Bar	BS L97 Cold Drawn Round Bar
Aluminium 6061 T6 Pickled & Passivated Round Bar	JIS A6061-T6 Cold Rolled Round Bar
UNS A96061 Coated / Plated Round Bar	Aluminium 6061 T6 Forged Round Bar
3.3211 Commercial Round Bar	UNS A96061 Peeled Round Bar
ASTM B221 Aluminium 6061 T6 Precision Round Bar	3.3211 Turned Round Bar
EN AW-6061 Straight Length Round Bar	ASTM B221 Aluminium 6061 T6 Ground Round Bar
ISO AlMg1SiCu Cut-to-Length Round Bar	EN AW-6061 Centreless Ground Round Bar
BS L97 Structural Round Bar	ISO AlMg1SiCu Precision Ground Round Bar