Duplex Steel UNS S32205 Flanges | ASTM A182 F60 | DIN 1.4462
Duplex steel UNS S32205 flanges are constructed using high-quality duplex stainless steel grades. UNS S32205 flanges are also famously known as alloy 2205. UNS flanges are designed to provide an amazing set of qualities, which makes them suitable for an extensive range of applications. The grade provides extreme protection from highly corrosive and high-temperature situations.
There are many impressive key properties and advantages to using this grade. One of the main advantages of UNS S32205 flanges is their high corrosion resistance. The duplex microstructure of the steel provides improved resistance to pitting, crevice corrosion, and stress corrosion cracking. As a result, these flanges are suitable for use in severe environments like chlorides, acids, and seawater. They are widely employed in the oil and gas industry, chemical processing, marine applications, and desalination plants.
If austenitic stainless steel is compared with UNS S32205 duplex, then it can be easily seen that UNS has immense strength and ductility. It allows flanges to endure high stress and high pressure. Similarly, while reducing the weight significantly,. As a result, these flanges are ideal for demanding applications requiring structural integrity and endurance.
Specification Duplex Steel UNS S32205 Flanges
| Standards | ANSI/ASME B16.5, B16.48, ANSI Flanges, GOST Flanges, DIN Flanges, EN-1092, B16.47 Series A & B, ASME Flanges, EN Flanges, AWWA Flanges, BS Flanges. |
| JIS Standard | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
| DIN FLANGES | DIN 2527, 2627, 2631, 2656, 2576, 2673, 2629, 2628, 2566, 2641, 2637, 2655, 2634, 2636, 2632, 2633, 2638, 2642, 2573, 2635. |
| Pressure Rating | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| Types | Threaded, Plate, Screwed, Forged. |
| Supporting material | Gasket, Ring Joint, Flange Bolts |
| Size range | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
| Production technique | Forged, machined and Heat treated |
| Available Flange Type | Weld Neck Flanges, RTJ Flanges, Slip On Flanges, Spectacle Blind Flanges, Flanges Gaskets, Square Flanges, Standard Insert Flanges, High Hub Blinds Flanges, Flat Flanges, forged flanges, Weldo / Nipo Flanges, Jacket Insert Flanges, Tongue groove Flanges, Blind Flanges, Socket Weld Flanges, Large diameter Flanges, Long Weld Neck Flanges, Spacer Blinds, SWRF Flanges, SORF Flanges, Angle Face Rings Flanges, Spades Ring Spacers Flanges, WNRF Flanges, Screwed Flanges, Insert Flanges, flanges bolts, cf flange, Lap Joint Flanges, ASME B16.36 Orifice Flanges, Plate Flange, Expander Flanges, Ring Type Joint Flanges, Loose Flanges, Reducing Flanges, puddle flange, Threaded Flanges, blank flange, vacuum flange. |
| Connect Type/ Flange Face Type | Ring Type Joint (RTJ), Flat Face (FF), Tongue & Groove, Small Male-Female (SMF), Lap-Joint Face (LJF), Raised Face (RF), Large Male-Female (LMF), Small Tongue. |
| Custom design | As per your drawing |
| Test | Direct-reading Spectrograph, X-ray detector, UItrasonic flaw detector, Magnetic particle detector, Hydrostatic testing machine. |
| Origin | Indian / USA / Korean / West Europe / Japan |
| Pressure Class | PN 6 TO PN 100 |
| Thickness | Normal Pipe Size ≤ 18 |
| Bore Diameter | Normal Pipe ≤ 10 |
| High Temperature | Above 200°C (400°F) For Class 150 Or Above 400°C (750°F) |
| Low Temperature | Above -29 Degree C (−20°F) |
| Coating/Surface Treatment: | Zinc Plated, Anti-rust Paint, Oil Black Paint, Yellow Transparent, Cold and Hot Dip Galvanized. |
| European/African/Russian Standard Flanges | Available |
| Gaskets Types | Full Face, Metallic Ring, Flat Ring Gasket |
Marking Standard | Name of Manufacturer |
| Schedule | |
| Type of Flange Facing | |
| Pressure Class | |
| Nominal Pipe Size, etc | |
Test Certificates | EN 10204/3.1B, NACE MR0103, NACE MR0175 |
| Raw Materials Certificate | |
| 100% Radiography Test Report | |
| Third Party Inspection Report, etc |
Flange Type Available
Equivalent Grade
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Duplex Steel S32205 | 1.4462 | S32205 | NW 2201 | NA 12 | НП-2 | – | LC-Ni 99 |
Chemical Properties
Grade | C | Mn | Si | S | Cu | Fe | Ni |
Duplex Steel S32205 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Mechanical Properties
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Duplex Steel S32205 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
ASME/ANSI B16.5 Duplex 2205 Flanges Dimensions Class-600
| Nominal Pipe Size NPS (inches) | Class 600 | ||||
|---|---|---|---|---|---|
| Diameter of Flange (inches) | No. of Bolts | Diameter of Bolts (inches) | Diameter of Bolt Holes (inches) | Bolt Circle (inches) | |
| 1/4 | 3-3/8 | 4 | 1/2 | 0.62 | 2-1/4 |
| 1/2 | 3-3/4 | 4 | 1/2 | 0.62 | 2-5/8 |
| 3/4 | 4-5/8 | 4 | 5/8 | 0.75 | 3-1/4 |
| 1 | 4-7/8 | 4 | 5/8 | 0.75 | 3-1/2 |
| 1-1/4 | 5-1/4 | 4 | 5/8 | 0.75 | 3-7/8 |
| 1-1/2 | 6-1/8 | 4 | 3/4 | 0.88 | 4-1/2 |
| 2 | 6-1/2 | 8 | 5/8 | 0.75 | 5 |
| 2-1/2 | 7-1/2 | 8 | 3/4 | 0.88 | 5-7/8 |
| 3 | 8-1/4 | 8 | 3/4 | 0.88 | 6-5/8 |
| 3-1/2 | 9 | 8 | 7/8 | 1 | 7-1/4 |
| 4 | 10-3/4 | 8 | 7/8 | 1 | 8-1/2 |
| 5 | 13 | 8 | 1 | 1.12 | 10-1/2 |
| 6 | 14 | 12 | 1 | 1.12 | 11-1/2 |
| 8 | 16-1/2 | 12 | 1-1/8 | 1.25 | 13-3/4 |
| 10 | 20 | 16 | 1-1/4 | 1.38 | 17 |
| 12 | 22 | 20 | 1-1/4 | 1.38 | 19-1/4 |
| 14 | 23-3/4 | 20 | 1-3/8 | 1.5 | 20-3/4 |
| 16 | 27 | 20 | 1-1/2 | 1.62 | 23-3/4 |
| 18 | 29-1/4 | 20 | 1-5/8 | 1.75 | 25-3/4 |
| 20 | 32 | 24 | 1-5/8 | 1.75 | 28-1/2 |
| 24 | 37 | 24 | 1-7/8 | 2 | 33 |
Duplex 2205 Flanges Dimensions Class-1500
| Nominal Pipe Size NPS (inches) | Class 1500 | ||||
|---|---|---|---|---|---|
| Diameter of Flange (inches) | No. of Bolts | Diameter of Bolts (inches) | Diameter of Bolt Holes (inches) | Bolt Circle (inches) | |
| 1/2 | 4-3/4 | 4 | 3/4 | 0.88 | 3-1/4 |
| 3/4 | 5-1/8 | 4 | 3/4 | 0.88 | 3-1/2 |
| 1 | 5-7/8 | 4 | 7/8 | 1 | 4 |
| 1-1/4 | 6-1/4 | 4 | 7/8 | 1 | 4-3/8 |
| 1-1/2 | 7 | 4 | 1 | 1.12 | 4-7/8 |
| 2 | 8-1/2 | 8 | 7/8 | 1 | 6-1/2 |
| 2-1/2 | 9-5/8 | 8 | 1 | 1.12 | 7-1/2 |
| 3 | 10-1/2 | 8 | 1-1/8 | 1.25 | 8 |
| 4 | 12-1/4 | 8 | 1-1/4 | 1.38 | 9-1/2 |
| 5 | 14-3/4 | 8 | 1-1/2 | 1.62 | 11-1/2 |
| 6 | 15-1/2 | 12 | 1-3/8 | 1.5 | 12-1/2 |
| 8 | 19 | 12 | 1-5/8 | 1.75 | 15-1/2 |
| 10 | 23 | 12 | 1-7/8 | 2 | 19 |
| 12 | 26-1/2 | 16 | 2 | 2.12 | 22-1/2 |
| 14 | 29-1/2 | 16 | 2-1/4 | 2.38 | 25 |
| 16 | 32-1/2 | 16 | 2-1/2 | 2.62 | 27-3/4 |
| 18 | 36 | 16 | 2-3/4 | 2.88 | 30-1/2 |
| 20 | 38-3/4 | 16 | 3 | 3.12 | 32-3/4 |
| 24 | 46 | 16 | 3-1/2 | 3.62 | 39 |
Pressure Class/ Rating
| ASME/ANSI B 16.5 | Lap Joint Flange, Ring Type Joint Flange, Threaded Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Slip on Flange, Welding Neck Flange. |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| ASME/ANSI B 16.47 | Blind Flange [Series A & B], Welding Neck Flange. |
| PRESSURE CLASS | 75, 150, 300, 400, 600, 900 |
| ASME/ANSI B 16.36 | Slip on Flange, Threaded Flange, Welding Neck Flange. |
| PRESSURE CLASS | 300, 400, 600, 900, 1500, 2500 |
| BS 4504 SEC 3.1 | Plate Flange, Welding Neck Flange, Hubbed Slip on Flange, Lapped Pipe End Flange, Loose Plate With Weld Neck Flange, Hubbed Threaded Flange, Blank Flange, Loose Plate Flange. |
| PRESSURE CLASS | PN 2.5 TO PN 40 |
| BS 4504[PART 1] | Blank Flange, Loose Plate With Weld On Plate Collar, Welding Neck Flange, Plate Flange, Hubbed Slip-On Hubbed Threaded. |
| PRESSURE CLASS | PN 2.5 TO PN 400 |
| BS 1560 BOSS | Blind Flange, Screwed Boss Flange, Welding Neck Flange,Slip-On Flange, Lapped Flange, Socket Welding Flange. |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| BS10 | Screwed Boss Flange, Plate Slip-On Flange, Slip-On Boss Flange, Blind Flange, Welding Neck Flange. |
| TABLE | D, E, F, H |
| DIN FLANGES | DIN 2527, 2632, 2635, 2673, 2566, 2655, 2631, 2627, 2634, 2576, 2636, 2629, 2633, 2573, 2656, 2638, 2637, 2642, 2641, 2628 |
| PRESSURE CLASS | PN 6 TO PN 100 |
Duplex 2205 Flange Weight Chart
Standard | Class | Diameter | Bolt Circle Diameter | Number of Bolts | Bolt Size | Diameter of Bolt Hole |
|---|---|---|---|---|---|---|
AS4087 Flanges | PN14 Flanges | 95 | 67 | 4 | M12 | 14 |
AS 2129 Flange | Table C Flanges | 95 | 67 | 4 | 13 | 14 |
Table D Flanges | 95 | 67 | 4 | 13 | 14 | |
Table E Flanges | 95 | 67 | 4 | 13 | 14 | |
Table F Flanges | 95 | 67 | 4 | 13 | 14 | |
Table H Flanges | 114 | 83 | 4 | 16 | 17 | |
Table J Flanges | 114 | 83 | 4 | 16 | 17 | |
ANSI B16.5 Flanges | ANSI 150 Flanges | 89 | 60 | 4 | 13 | 16 |
ANSI 300 Flanges | 95 | 67 | 4 | 13 | 16 | |
ANSI 600 Flanges | 95 | 67 | 4 | 13 | 16 | |
ANSI 900 Flanges | 121 | 83 | 4 | 19 | 22 | |
ANSI 1500 Flanges | 121 | 83 | 4 | 19 | 22 | |
ISO 7005 (DIN) Flange | PN6 Flanges | 80 | 55 | 4 | M10 | 11 |
PN10 Flanges | 95 | 65 | 4 | M12 | 14 | |
PN16 Flanges | 95 | 65 | 4 | M12 | 14 | |
PN20 Flanges | 90 | 60.5 | 4 | M14 | 16 | |
PN25 Flanges | 95 | 65 | 4 | M12 | 14 | |
PN40 Flanges | 95 | 65 | 4 | M12 | 14 |
Application
- Food & Beverage
- Paper Industry
- Pharmaceutical
- Hospital Equipment
- Textiles
- Dairy
- Aircraft
- Chemicals
- Others Parts in Machinery
Testing
- Hydrostatic Test
- Macro Test
- Ultra Sonic Test (UT)
- Micro Test
- Hardness Test
- Radiography Test
- Pitting Resistance Test
- PMI Testing
- Mechanical Testing
- X-ray detector
Packing
- Wooden Boxes
- Shrink-Wrappedt
- Carton Boxes
- Wooden Crates
- Wooden Pallets
