Pm Industries

Duplex F60 Flanges

ASTM A694 F60 Flanges are generally used in industries such as oil and gas, petrochemicals, and power chemicals. This is the standard for alloy steel and carbon forging for fittings, valves, and pipe flanges. These flanges consist of minimum yield strength. 

ASTM A694 F60 flanges are designed for high temperature applications and to resist rusting and rigorous operating conditions. 

ASTM A694 F60 flanges are made from high quality chemical compositions, which make them highly resistant to heat and wear and tear. These flanges are made in punched, drilled and rolled machined types. These flanges are used for connecting valves, pumps, and other equipment to form a piping system.

Specification-Duplex F60 Flanges

Standards ANSI/ASME B16.5, B16.48, ANSI Flanges, GOST Flanges, DIN Flanges, EN-1092, B16.47 Series A & B, ASME Flanges, EN Flanges, AWWA Flanges, BS Flanges.
JIS Standard 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
DIN FLANGES DIN 2527, 2627, 2631, 2656, 2576, 2673, 2629, 2628, 2566, 2641, 2637, 2655, 2634, 2636, 2632, 2633, 2638, 2642, 2573, 2635.
Pressure Rating Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Types Threaded, Plate, Screwed, Forged.
Supporting material Gasket, Ring Joint, Flange Bolts
Size range 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Production technique Forged, machined and Heat treated
Available Flange Type Weld Neck Flanges, RTJ Flanges, Slip On Flanges, Spectacle Blind Flanges, Flanges Gaskets, Square Flanges, Standard Insert Flanges, High Hub Blinds Flanges, Flat Flanges, forged flanges, Weldo / Nipo Flanges, Jacket Insert Flanges, Tongue groove Flanges, Blind Flanges, Socket Weld Flanges, Large diameter Flanges, Long Weld Neck Flanges, Spacer Blinds, SWRF Flanges, SORF Flanges, Angle Face Rings Flanges, Spades Ring Spacers Flanges, WNRF Flanges, Screwed Flanges, Insert Flanges, flanges bolts, cf flange, Lap Joint Flanges, ASME B16.36 Orifice Flanges, Plate Flange, Expander Flanges, Ring Type Joint Flanges, Loose Flanges, Reducing Flanges, puddle flange, Threaded Flanges, blank flange, vacuum flange.
Connect Type/ Flange Face Type Ring Type Joint (RTJ), Flat Face (FF), Tongue & Groove, Small Male-Female (SMF), Lap-Joint Face (LJF), Raised Face (RF), Large Male-Female (LMF), Small Tongue.
Custom design As per your drawing
Test Direct-reading Spectrograph, X-ray detector, UItrasonic flaw detector, Magnetic particle detector, Hydrostatic testing machine.
Origin Indian / USA / Korean / West Europe / Japan
Pressure Class PN 6 TO PN 100
Thickness Normal Pipe Size ≤ 18
Bore Diameter Normal Pipe ≤ 10
High Temperature Above 200°C (400°F) For Class 150 Or Above 400°C (750°F)
Low Temperature Above -29 Degree C (−20°F)
Coating/Surface Treatment: Zinc Plated, Anti-rust Paint, Oil Black Paint, Yellow Transparent, Cold and Hot Dip Galvanized.
European/African/Russian Standard Flanges Available
Gaskets Types Full Face, Metallic Ring, Flat Ring Gasket
Marking Standard
Name of Manufacturer
Schedule
Type of Flange Facing
Pressure Class
Nominal Pipe Size, etc
Test Certificates
EN 10204/3.1B, NACE MR0103, NACE MR0175
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc

Flange Type Available

Slip on

Weldo

Weld Neck

Tongue Groove

Spectacle Blind

Spade

Threaded Screwed

Square

Ring Type Joint

Ring Spacer

SocketWeld

Reducing

Raised Face

Puddle

Plate

Orifice

Nippo

Male Female

Long Weld Neck

Lap Joint

Equivalent Grade

STANDARDWERKSTOFF NR.UNS
Duplex F601.4462S32205

Chemical Properties

GradeCMnSiPSCrMoNiNFe
Duplex F600.030 max2.00 max1.00 max0.030 max0.020 max21 – 232.50 - 3.504.50 – 6.500.8 – 0.2063.54 min

Mechanical Properties

DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
7.8 g/cm31350 °C (2460 °F)Psi – 80000 , MPa – 550Psi – 116000 , MPa – 80015 %

ASME/ANSI B16.5 Duplex F60 Flanges Dimensions Class-1500

Nominal Pipe Size
NPS
(inches)
Class 1500
Diameter of
Flange
(inches)
No.
of
Bolts
Diameter of
Bolts
(inches)
Diameter of
Bolt Holes
(inches)
Bolt
Circle
(inches)
1/24-3/443/40.883-1/4
3/45-1/843/40.883-1/2
15-7/847/814
1-1/46-1/447/814-3/8
1-1/27411.124-7/8
28-1/287/816-1/2
2-1/29-5/8811.127-1/2
310-1/281-1/81.258
412-1/481-1/41.389-1/2
514-3/481-1/21.6211-1/2
615-1/2121-3/81.512-1/2
819121-5/81.7515-1/2
1023121-7/8219
1226-1/21622.1222-1/2
1429-1/2162-1/42.3825
1632-1/2162-1/22.6227-3/4
1836162-3/42.8830-1/2
2038-3/41633.1232-3/4
2446163-1/23.6239

ASME/ANSI B16.5 Duplex F60 Flanges Dimensions Class-2500

Nominal Pipe Size
NPS
(inches)
Class 2500
Diameter of
Flange
(inches)
No.
of
Bolts
Diameter of
Bolts
(inches)
Diameter of
Bolt Holes
(inches)
Bolt
Circle
(inches)
1/25-1/443/40.883-1/2
3/45-1/243/40.883-3/4
16-1/447/814-1/4
1-1/47-1/4411.125-1/8
1-1/2841-1/81.255-3/4
29-1/4811.126-3/4
2-1/210-1/281-1/81.257-3/4
31281-1/41.389
41481-1/21.6210-3/4
516-1/281-3/41.8812-3/4
619822.1214-1/2
821-3/41222.1217-1/4
1026-1/2122-1/22.6221-1/4
1230122-3/42.8824-3/8

Duplex F60 Flange Pressure Class/ Rating

ASME/ANSI B 16.5
Lap Joint Flange, Ring Type Joint Flange, Threaded Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Slip on Flange, Welding Neck Flange.
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47 Blind Flange [Series A & B], Welding Neck Flange.
PRESSURE CLASS 75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36 Slip on Flange, Threaded Flange, Welding Neck Flange.
PRESSURE CLASS 300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1
Plate Flange, Welding Neck Flange, Hubbed Slip on Flange, Lapped Pipe End Flange, Loose Plate With Weld Neck Flange, Hubbed Threaded Flange, Blank Flange, Loose Plate Flange.
PRESSURE CLASS PN 2.5 TO PN 40
BS 4504[PART 1] Blank Flange, Loose Plate With Weld On Plate Collar, Welding Neck Flange, Plate Flange, Hubbed Slip-On Hubbed Threaded.
PRESSURE CLASS PN 2.5 TO PN 400
BS 1560 BOSS Blind Flange, Screwed Boss Flange, Welding Neck Flange,Slip-On Flange, Lapped Flange, Socket Welding Flange.
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
BS10 Screwed Boss Flange, Plate Slip-On Flange, Slip-On Boss Flange, Blind Flange, Welding Neck Flange.
TABLE D, E, F, H
DIN FLANGES DIN 2527, 2632, 2635, 2673, 2566, 2655, 2631, 2627, 2634, 2576, 2636, 2629, 2633, 2573, 2656, 2638, 2637, 2642, 2641, 2628
PRESSURE CLASS PN 6 TO PN 100

Application

  • Food & Beverage
  • Paper Industry
  • Pharmaceutical
  • Hospital Equipment
  • Textiles
  • Dairy
  • Aircraft
  • Chemicals
  • Others Parts in Machinery

Testing

  • Hydrostatic Test
  • Macro Test
  • Ultra Sonic Test (UT)
  • Micro Test
  • Hardness Test
  • Radiography Test
  • Pitting Resistance Test
  • PMI Testing
  • Mechanical Testing
  • X-ray detector

Packing

  • Wooden Boxes
  • Shrink-Wrapped
  • Carton Boxes
  • Wooden Crates
  • Wooden Pallets
Flange Packaging

Stainless Steel Flanges

Scroll to Top