...................................

P & M INDUSTRIES, INC.                          PHONE: (517) 223-1000

5901 Weller Rd.                                                              FAX: (517) 223-4008

P.O. Box 141                                                       WEBSITE: pm-industries.com

Gregory, Mi. 48137                                            E-MAIL: glen@pm-industries.com

EQUIPMENT LIST

MACHINING EQUIPMENT

                One DeVlieg 4K-96 Jig Mill,  X=96” Y=48” Z=20”,W=20” Bendix Numerical X Y Control

            40” X 40” 24 Position Index Table   4” Bar  #50 Taper Tooling

            One DeVlieg JMC 4340 CNC 4-Axis Horizontal Machining Center   X=40” Y=50” Z=16” W=16”

            30” X 30” CNC 360 Position Rotary Table  4” Bar Cat. 50 Taper Tooling 48 Station Tool changer

             One DeVlieg JMC 4340 CNC 4-Axis Horizontal Machining Center   X=40” Y=40” Z=16” W=16”

            30” X 40” CNC 360 Position Rotary Table  4” Bar Cat. 50 Taper Tooling 32 Station Tool Changer

            One DeVlieg 3H- 48 Horizontal  Jig Mill  X=48” Y=36” Z=16” W=16” Acu-Rite X Y Z Readout

            30 X 40 Manual four (4) Position DeVlieg Index Table  3” Bar  #40 Taper Tooling

            One DeVlieg 3B-48 Horizontal Jig Mill  X=48” Y=36” Z=36” W=16” Acu-Rite X Y Z Readout

            20 X 20 Manual Four (4) Position DeVlieg Index Table  3” Bar  #40 Taper Tooling

            One DeVlieg 4H-60 Horizontal Jig Mill   X=60” Y=48” Z=20” W=20” Sony X Y Z Readout

            30 X 40 Manual Four (4) Position DeVlieg Index Table  4” Bar  #50 Taper Tooling

             One DeVlieg 4B-60 Horizontal Jig Mill   X=60” Y=48” Z=20” W=20” Futaba Pulscale USA

              X Y Z Readout 30 X 30 Manual (360) Position DeVlieg Index Table 4” Bar

             #50 Taper Tooling

            One 4 Ft. Arm Radial Drill

            Box Table   Rotary Table  Quick Change Tooling

             One Rockwell Four Spindle Drill Press

            One Bridgeport Milling Machine   10” Rotary Table With Tailstock   8” Vice

            Full Line of Tooling and Readouts with Power Feed

            One Cincinnati Hydroshift 19” X 48” (CC) Lathe

            3 & 4 Jaw Chucks   Face Plate   Full Set of Quick Change Tooling & Live Centers

            One 30” X 60” Tool Presetter for Length & Diameter

            One DeVlieg Tool Presetter for Length And Diameter

            One DeVlieg Micropointer Tool Grinder

             One Kalamazoo Cutoff Saw

             One Miller Model 450 Wire Feed Welder

GRINDING EQUIPMENT

             One 6” X 18” Surface Grinder complete with Sine Plates, Angle Plates, Indexers,

            Live Center and Grinding Wheels

             One 12” X 24” ACER Wet Surface Grinder

             Four Diamond Wheels

             Appx. 200 Grinding Wheels

TOOL HOLDERS

            Thirteen Deluxe Lista Storage Cabinets

            200 Pieces of #40 Taper Shank Tooling

            350 Pieces of #50 Taper Shank Tooling

            150 Pieces of Cat # 50 Taper Shank Tooling

            Fifteen Tapping Heads and Collets

SET UP TOOLING

            One 20” Diameter Eight (8) Position Index Table

             Three  Sets of DeVlieg 48” Boxed, T-Slotted Angle Plates

             One Set of 12” X  24” High Angle Plates

             One Set of 12” X 48” High Angle Plates

             Four 4” X  4” X 12” Set Up Blocks

             Four 4” X  4” X 8”   Set Up Blocks

             Eight  3” X  4” X  6” Set Up Blocks

             Eight  3” X  4” X  4” Set Up Blocks

             Eight  3” X  4” X  3” Set Up Blocks

             Ten  3” X  4” X  2” Set Up Blocks

             Two 3” X  4” X  4” Chair set Up Blocks

             Two 3” x  4” x  8” 120 Degree V-Blocks

             Six  .812 Slot Blocks

             Two 1 ¼”  X  6”  X  10” Set Up Plates with 5/8 –11 Tapped Holes

             One Boxed Set of  Vice Parallel Blocks

CUTTING TOOLS

             Lot of Drills to 3 Inches Appx. 1000 Pieces

             Lot of Reamers to 3 Inches Appx. 500 Pieces

             Lot of Straight and Tapered Shank Boring Bars

             Lot of Face Mills to 10 Inches

             Lot of Carbide Insert Drills to 3 Inches

             Lot of Various Size Saw Cutters

             Lot of End Mills to 2 ½ Inches Appx 1000 Pieces

             Lot of Taps to 4 Inches Appx. 1000 Pieces

MATERIAL HANDLING

             One 2Ton Overhead Bridge Crane

             Three 1 Ton Jib Cranes

             One 24,000 G.V.W. GMC Flatbed Diesel Truck

             One 2,500 lb. Capacity Clark Lift Truck

             One 6000# Capacity Lift Truck

COMPUTERS/SOFTWARE

             One IBM Compatible C.A.D. System with AutoCAD Software

             One IBM Compatible C.A.M. System with MasterCAM Software

             One IBM Compatible C.M.M. Computer System with Brown & Sharpe PCDMIS Software

             One IBM Compatible Computer System  (For Various Uses)

             One IBM Compatible System for Machine Programming

             One DSL Satellite Dish System

GAGING EQUIPMENT

             One 12” Mitutoyo Height Master

             One Riser Block for Height Master

             Fifteen  2” – 12” Interapid Bore Gages

             Ten Federal Bore Gages (Various Sizes)

             One 18” Digit Count Height Gage

             One 12” Digit Count Height Gage

             One 48” Vernier Height Gage

             One 36” X 48” Starrett Granite Surface Plate

             One Surtronic-10 Surface Finish Gage

             One Set of Wire Thread Gages

             Fourteen 1-2-3 Blocks

             Fourteen 2-4-6 Blocks

             Three V-Blocks

             Three Sine Plates

             Two Inside (I.D.) Micrometers

             Forty Five Outside (O.D.) Micrometers

             Fifteen Depth Micrometers

             Fifteen Calipers

             Fifteen Indicators

             One Hundred Ring Gages

             One Hundred Plug Gages

             Fifty Threaded Ring Gages

             Sixty Five Threaded Plug Gages

HONING EQUIPMENT

              One Sunnen Hone with complete Set of Arbors

              One 2” to  6” Cylinder Hone

              Two 2” to 2 ½” Cylinder Hone

               Eight 1” to 2” Set of Hones

WELDING EQUIPMENT

               One Miller 450 Wire Feed Welder

               One Set of Brazing Torches

               One Miller Stick Welder